CBE 12V/16A SWITCH MODE BATTERY CHARGER CB516-3

 
This switching battery charger can automatically charge 12 V lead batteries (lead-acid-gel). The battery charger is protected against overheating and the 12 V outputs are protected against possbile short circuits and polarity reversal.

The charging process takes place in four stages:

Maximum current battery charging until the charging voltage is reached. NOTE: the charging voltage can be reached only if the battery is fully efficient.
When the charging voltage is reached the battery charger continues to work at continuous voltage for 90 minutes (lead-acid batteries) or 8 hours (lead-gel batteries).
Continuous voltage maintenance at 13.8 V (gel batt.) or 13.5 V (acid batt.).
After 10 hours of maintenance the battery charger switches to the Stand-by position and charges again only if the battery voltage is lower than 13 V.
The switching high frequency technology allows to obtain excellent performances with limited weight and dimensions.
 
INPUT TECHNICAL DATA
Nominal voltage : 240 Vac ±10 %
Frequency : 50Hz
Maximum power : 250 W
Protection fuse : 2 A (5x20 glass)
Security on/off switch 230 V
OUTPUT TECHNICAL DATA
Maximum voltage : 14,3 Vdc (Lead-acid /Gel) - 14,1 Vdc (Lead-acid)
Maintenance voltage : 13,8 V (Lead-acid /Gel) - 13,5 V (Lead-acid)
Maximum current : 16 A
Charging line : IUoU
Battery type selector : Lead-acid / Gel
Short-circuit and polarity inversion protected 15 °C
Thermal protection : Yes
Mains signal : 12V 50mA
TECHNICAL DATA
Efficiency : 86%
Room temperature : 0 ÷ 50 °C
Ventilation : Forced, automatic changing regulation
Protection degree : IP 30
Mains connection : "mate-n-lock" 3 poles connector
Battery connection : "mate-n-lock" 4 poles connector
Case : Nylon + fiber glass, self-extinguishing
Dimensions : 180 x 140 x 85 mm
Weight : 1Kg